Foscam FI8910W Pan & Tilt IP/Network Camera with Two-Way Audio and Night Vision (White)

Foscam 910W Wireless/Wired Pan & Tilt IP/Network Camera (White).Light Frequency 50 / 60 Hz or outdoor .Storage Temperature: 14 ~~ 140° F (-10 – 60° C), Storage Humidity: 0 ~~ 90% non-condensing.What’s in the box: FOSCAM FI8910W Wireless IP Camera (Black), WiFi Antenna, Mounting Bracket, Network Cable, 5V DC Power Supply, Installation CD, User Manual

Get It Now! $196.00Amazon.com Price
(as of 09/23/2017 3:43 pm UTC - Details)

Foscam 910W Wireless/Wired Pan & Tilt IP/Network Camera (White).Light Frequency 50 / 60 Hz or outdoor .Storage Temperature: 14 ~~ 140° F (-10 – 60° C), Storage Humidity: 0 ~~ 90% non-condensing.What’s in the box: FOSCAM FI8910W Wireless IP Camera (Black), WiFi Antenna, Mounting Bracket, Network Cable, 5V DC Power Supply, Installation CD, User Manual and 2-Year Limited Warranty.High image & video quality (Display resolution: 640 x 480 Pixels (300k Pixels)). 2 year extended warranty, when bought from authorized retailers listed at foscam.us/where-to-buy.html

Product Features

  • Building on the success of the Foscam FI8918W, the FI8910W is the latest camera from Foscam Digital Technologies LLC.It features high quality video & audio, pan/tilt, remote internet viewing, motion detection, night-vision, embedded IR-Cut filter, built in network video recording system as well as free telephone technical support available from Foscam Digital Technologies LLC.
  • The distinguishing features of the FI8910W are the embedded IR-Cut off filter, upgraded external housing, wider horizontal panning range and 2 year Warranty.
  • The IR-cut filter provides true & accurately images fixing the problems related to washed out and discolored images. In addition, the cut off filter also allows the camera to properly automatically adjust to changing lighting conditions so the user does not manually have to do this.
  • Also includes, two-way audio monitoring, remote pan/tilt control (pan:300° & tilt:120°), freely control IR-LED on/off for night vision (up to 8 meters)
  • Remote viewing via local network or internet, record from anywhere anytime, motion detection alert via email or upload image to FTP, Blue Iris compatible; Supports all standard browsers, Iphone, Ipad, Ipod, Android & BlackBerry, Wi-Fi compliant (IEEE 802.11b/g), supports WEP & WPA WPA2 Encryption

Comments

J Den says:

Beware of a hardware problem introduced on newer Foscam cameras Quick Summary: Foscam is manufacturing and selling cameras with a known manufacturing defect. If the camera is pointed at a scene with too much detail (trees, grass, wood grain, window screen, etc) the camera will fail by either freezing, displaying black or rebooting. This defect was introduced as the result of a sensor change late in 2012. This manufacturing defect has been confirmed by Foscam as the DSP and a repair procedure has been made available. However, Foscam (the manufacturer) has released themselves of responsibility for repairing this defect. To be clear, Foscam acknowledges this manufacturing problem but refuses to be responsible for repairing the cameras. As of this writing, 423 faulty cameras have been reported in the Foscam forums. Exchanging the camera does not correct the problem as +91% of exchanges have the same defect (also detailed in the forums). The small percentage of successful exchanges are explained as old 2012 inventory. Users also confirm that Foscam…

R. Tickle "RATickle" says:

Excellent Features for the Price Considering that you are paying less than $100 for a wireless IP Camera that provides PT (no Zoom), infrared night vision, motion detection, and automatic email of alarm photos, there is very little one can criticize about this camera. Yes, it’s tricky to set-up if you have never done port-forwarding before and yes, the frame rate and resolution are both a little low, and the audio is crap, but remember that you paid less than $100 for this thing. If you need audio, higher frame rates and better resolution, you should buy a more expensive IP camera.As far as setup goes, if you understand networking and port-forwarding, these are my recommendations:1) Do NOT install the software on the CD.2) Connect the camera by Cat-5 wire to your router.3) Login to your router (via browser) and find the IP address assigned to your camera.4) Login to the camera at that IP address (via browser) and IMMEDIATELY turn OFF the DHCP.5) Give your camera a…

Roger H Gray says:

Great inexpensive security cam The Foscam F18910W camera is operating quite well. I have 3 F18918W cameras and have been pleased with their operation and function as well. They are very stable cameras – images always available whenever I link to them- and easy to set up.For setup, I have found it easier to just plug them in using the Ethernet connection, and then log into my router and find their IP address, and set them up from there. The only thing you have to remember during setup is that the new camera’s port may be set the same as an existing camera. In this case either shut down any existing cameras, or use the FosCam install software and let it find the new camera and port number.I have the FosCams mounted in our business for security and their range of motion and quality of images- including infrared- has been invaluable. Also the sound quality is good from the camera. Talking through the cameras to someone is weak, but there. I am replacing older D-Link DCS-900 cameras which are…

Comments are disabled for this post.